2.3.4. Governing bodies and equipment of salon

The left understeering switch serves for switching of the modes of functioning of running lighting and alarm fixtures, and also for activation of indexes of turns.


Activation of running fires and inclusion of passing beam of headlights

For activation of running fires turn the face handle of the lever of the understeering switch in the first fixed situation.

At the same time there will be an inclusion of lobbies and back marker lights, lamps of illumination of registration plate and illumination of the dashboard. For transfer of headlights to the mode of passing beam it is necessary to turn the face handle of the main switch in the second fixed situation — all other running fires will continue to function as before.

For the purpose of economy of an expense of the electric power switching off of ignition function of automatic shutdown of external lighting fixtures (including fog lights) on the expiration of 45 seconds after switching off of ignition is provided. Results in similar result also opening of any of forward doors of the car. If the face handle of the understeering switch is left any of working provisions or , it is enough to make inclusion of ignition for activation of lighting fixtures.

Repeated activation of external lighting fixtures by means of the understeering switch after their automatic shutdown leads to blocking of function of automatic shutdown — in order to avoid risk of replanting of the rechargeable battery, do not forget to return the face handle of the switch in position of OFF, leaving the car for long term. Also avoid long use of external lighting at the idle engine.


Running fires of day time of day (only Canadian models)

On the models of a headlight equipped with system of running fires of day time of day (DRL) join in the luminescence mode with small intensity at the started engine and the removed parking brake. The face handle of the left understeering switch at the same time can be both in situation, and in position of OFF. For transfer of headlights to the mode of passing beam it is necessary to turn the handle in situation. For deactivation of DRL it is necessary to switch off ignition, having turned a key in position of OFF.


Activation of driving beam of headlights

There are two ways of activation of driving beam of headlights: the first means inclusion of driving beam in the constant mode, the second is used for the alarm system by driving beam.

For activation of driving beam in the constant mode it is necessary to wring out the lever of the left understeering switch from itself, having transferred it to the fixed situation. In this mode inclusion of driving beam is obviously possible only at the included running fires (see above).

For short-term activation of driving beam for the purpose of the alarm system it is enough to delay the switch lever on itself — the otpuskaniye of the lever will lead to cutoff of driving beam. Short-term inclusion of driving beam is made irrespective of in what situation there is a rotary face handle of the main switch see above).


Activation of fog lights

The rotary ring switch of management of functioning of fog lights is located on the handle of the lever of the left combined understeering switch and can be installed in one or the other the fixed provisions: OFF (Vykl) or.


Activation of fog lights is represented possible only at the turned-on passing beam.


Inclusion of indexes of turns

Inclusion of indexes is made by means of the lever of the left combined understeering switch. The lever is transferred up or down, to dependences of the chosen direction of change of course.

At transfer of the lever to extreme top / lower situation (before click) the corresponding indexes of turns will continue to function until the steering wheel is not returned in rectilinear situation, or the lever will not be returned in the central situation forcibly.

Short-term inclusion of indexes, for example, for example, at intention to replace a lane of the movement, is made by easy procrastination of the lever up or down, respectively.


The right combined understeering switch

The right understeering switch is intended for management of functioning of cleaners and washers of wind and back glasses.


Management of functioning of cleaners and washers of a windshield

Inclusion of cleaners / washers of a windshield can be made only at the included ignition (position of ON and ASS).

The choice of the modes of functioning of screen wipers is made by movement of the lever of the switch down / up. Parameters of the interval mode of functioning of screen wipers (in the range of 4 — 12 seconds) can be chosen by means of the rotary face handle on the end of the lever (see in the same place).


Screen wipers should be included in frosty weather only after the windshield is heated-up!

For giving on glass of the washing liquid it is necessary to pull the switch lever on itself — screen wipers also have to join on several cycles.

It is not necessary to include washers more than for 30 seconds. It is not necessary to make attempts of inclusion of supply of liquid at the empty tank.


Management of functioning of a cleaner and washer of back glass

Activation of a cleaner / washer of back glass can be made only at the included ignition (position of ON and ASS).

For inclusion of a screen wiper in the interval mode of functioning turn the ring handle on the lever of the understeering switch on one division clockwise, having transferred it from neutral (OFF) situation to situation. The turn of the handle on one division leads to inclusion of the low-speed mode of functioning of a screen wiper.


Activation of a back screen wiper can be made only at the locked back glass, and closing of glass has to be made at the switched-off screen wiper. Opening of back glass at the working screen wiper is also not possible.


The screen wiper should be included in frosty weather only after back glass is heated-up!

For giving on glass of the washing liquid it is necessary to turn the handle against the stop in any direction — the screen wiper also has to join on several cycles.

It is not necessary to include supply of the washing liquid more than for 30 seconds! It is not necessary to make attempts of inclusion of supply of liquid at the empty tank!


Regulator of intensity of illumination of the dashboard

The regulator of intensity of illumination is built in in the car dashboard more to the left of a steering column (see the illustration Scheme of an Arrangement of Governing Bodies on the car dashboard). The required intensity of illumination of the panel is made by rotation of a potentiometer.


The regulator begins to function only at the included running fires (see above).


Switch of the alarm light system

Turning on of the alarm system is made by push-up of the push-button switch which is built in in the central part of the dashboard of the car (to the right of a steering wheel, under the deflector of the central air duct of ventilation / heating of salon — see the illustration Scheme of an Arrangement of Governing Bodies on the car dashboard) and usually equipped with a control lamp with the pictogram representing two triangles entered one in another.

Turning on of the alarm system can be made in any position of the ignition key and leads to simultaneous operation of all four indexes of turns (and their control lamps on an instrument guard of the car) the Alarm system is intended for the warning of other participants of traffic of the compelled stop of the car and is used also in other dangerous situations provided by traffic regulations.

At the switched-on alarm system indexes of turns will not function!


Switch of an electrical heating of back glass / external rear-view mirrors

The push-button switch of heating of back glass / rear-view mirrors is located directly under the switch of the alarm system and is equipped with the built-in control lamp (see the illustration Scheme of an Arrangement of Governing Bodies on the car dashboard).

Inclusion of an electrical heating allows to remove from the surfaces of back glass / door rear-view mirrors of condensate, hoarfrost, and even thin frost. At inclusion of an electric heater the light indicator which is built in the switch button lights up. Shutdown of heating is made by repeated pressing the button.

The threadlike grid of a heating element of a heater is pasted on the internal surface of back glass and demands care in the address — try not to damage a grid when wiping glass. Wiping should be made only along heater threads.

Functioning of a heater is accompanied by the increased energy consumption level therefore, in order to avoid replanting of the rechargeable battery, the chain of management of the device switched on the timer making automatic shutdown of system after 15 minutes of its continuous work.

Do not forget to check before a start of motion quality of the review through back glass of the car.


Horn switch

The decorative cover of a stupichny part of a steering wheel / module of a safety cushion acts as the button of a horn. For activation of a sound signal it is necessary to press on the central part of the button.


Switches of management of heating of front seats

Front seats of the car are equipped with the built-in heaters. Switches of management of heating of seats are located in the lower part of the central section of the dashboard (see the illustration Scheme of an Arrangement of Governing Bodies on the car dashboard) and equipped with the built-in control lamps. Activation of heating elements (TEN) of driver's and passenger seats can be made independently.

Start the engine — inclusion of heating of seats at the killed engine leads to the bystry category of the rechargeable battery.

Having pressed the relevant party of the keyboard switch, choose the required mode of intensity of heating — on a key the corresponding indicator has to be highlighted. Control of functioning of TENA is exercised automatically by means of the thermostat. Do not forget to switch off heating before leaving the car.


Do not cover a seat with heat-insulating materials, such as blankets, padded stools or dense covers!
Do not put firm or sharp objects on seats, try not to allow risk of damage of an upholstery and the heating element located under it!
Immediately collect any liquid spilled on a seat by dry rags!
Do not apply any solvents to cleaning of an upholstery of seats — use soft cleaners!
In case of violation of serviceability of functioning of heating of seats ask for the help in car service!


Switch of management of functioning of the electric drive of rear-view mirrors

Assembly of management of functioning of the electric drive of external rear-view mirrors is built in in the car dashboard, to the left of a steering column (see the illustration Scheme of an Arrangement of Governing Bodies on the car dashboard).

Assemblies of management of two types are used: And yes Century.

In assembly of type A the choice of the mirror which is subject to adjustment is made by means of the push-button switch.

L — the Left mirror
R — the Right mirror


 PERFORMANCE ORDER

  1. Include ignition (position of ON or ASS of a key).
  2. Pressing the relevant party of the push-button switch make the choice of the mirror which is subject to adjustment.
  3. By means of the joystick switch make updating of the provision of the chosen mirror.
  4. After completion of adjustment repeatedly press the button for a drive conclusion in neutral situation — it is necessary in order that by casual pressing the button not to break adjustment.

In assembly of type In the choice of a mirror it is carried out by turning of the handle of the only joystick switch in the relevant party. Further actions are similar described above for system of A type — do not forget to return the handle to neutral situation.

L — the Left mirror
R — the Right mirror


Switches of management of functioning of the electric drive of window regulators

The electric drive of window regulators remains active within 45 more seconds after switching off of ignition, opening within the stipulated term of any of forward doors of the car leads to shutdown of giving of food on the drive.


Main control panel of functioning of the electric drive of window regulators

1 — the Switch of a window regulator of the left back door
2 — the Switch of a window regulator of a driver's door
3 — to Press for glass lowering
4 — to Pull for glass lifting

5 — the Button of activation of the uniform lock
6 — the Switch of a window regulator of the right back door
7 — the Switch of a window regulator of the right forward door
8 — the Button of blocking of individual switches of passenger doors

The electric drive of window regulators functions only at the included ignition. The main control panel of functioning of the electric drive of window regulators of milestones of doors it is located on an armrest of a driver's door (see an illustration the Main control panel of functioning of the electric drive of window regulators).

For lowering / lifting of glass use the corresponding individual switch (address an illustration 14.15). The possibility of management of window regulators of all doors from the driver's place is provided (see an illustration the Main control panel of functioning of the electric drive of window regulators).

The button allowing the driver to block regulators of all passenger doors is also provided (see an illustration the Main control panel of functioning of the electric drive of window regulators). For shutdown of blocking press the lock button repeatedly. For lowering / lifting of glass press / delay a key of the corresponding switch and hold it in this situation.

The possibility of machine translation of glass of a driver's door is provided in extreme lower situation — to press rather quickly strongly the AUTO key of the control panel of a driver's door (at an otpuskaniye slightly of the pressed key lowering of glass will stop). To suspend process of automatic lowering of glass delay a key up.


Management of functioning of the drive of the top hatch

The electric drive of the top hatch remains active within 45 more seconds after switching off of ignition, opening within the stipulated term of any of forward doors of the car leads to shutdown of giving of food on the drive.


The electric drive of the top hatch functions only at the included ignition. The cover of the hatch can move back, parallel to a roof surface, bend forward with raising of its rear edge.


The control panel of functioning of the electric drive of the top hatch is located on the ceiling console of the car.

To shift a cover of the hatch wring out a rychazhok of the left switch of the panel back (towards the pictogram) and hold it in this situation. Closing of the hatch is made by push-up a rychazhka to the opposite side ().

For transfer of a cover of the hatch to inclined situation at first completely close it, then wring out and hold the pressed switch key marked with the pictogram. Lowering of a cover is made by push-up of the opposite side of a key.

In addition top hatch is equipped with a sun-protection blind. When moving a cover of the hatch the blind cleans up automatically. Closing of a blind is made manually.

You watch that passengers did not lean out in the hatch during the movement of the car. Before opening of the hatch clear a cover of moisture, snow, dust and other foreign deposits. Do not put on a cover of the hatch and a surface of a roof of the car near the hatch any heavy objects!
At failure of the electric drive of a cover of the hatch the car should be driven away on car repair shop for performance of the corresponding recovery repair.


Switch of the uniform lock

See Access, protection.


Switches of management of functioning of the electric drive of adjustment of provision of front seats

See Elements of security systems.


Switch of the modes of functioning of the transfer case (4WD)

See Methods of operation.


Switches of management of functioning of a tempostat

See Instructions for use control system of speed (tempostaty).


Switch of the all-wheel drive mode

See Methods of operation.


Ignition switch

See Removal and installation of the lock of ignition/blocking of a steering column.


Hours

Digital watch is built in in the regular audio system (see Comfort). Indications of hours are displayed the display only at the included ignition (a key in position of ON or ASS). After shutdown of onboard food of the indication of hours are dumped and have to be established anew.


Installation of time

Installation of indications of the current hour is made by means of the button (N), minute — by means of the button (M).

By means of the CLOCK button on the control panel of the audio system the choice of the mode of functioning of the display is made (hours / radio tape recorder).

In the CLOCK mode of the indication of the current time have an absolute priority — parameters of functioning of the audio system will be displayed only quickly when changing the modes.

After implementation of control of the current time the display is transferred to the CLOCK mode automatically.


Sockets of onboard power supply


Two options of execution of the socket of onboard power supply

The socket of onboard food is intended for connection of service electric equipment. The key has to be turned in position of ON or ASSORTMENT.

On the car two sockets of food are provided — one in a back face wall of the central console, the second — in the right back corner of the luggage compartment, near a cover of a ware box. Both sockets are equipped with a protective cover which should be held at not connected equipment closed (see an illustration Two options of execution of the socket of onboard power supply).


Precautionary measures


Lighter and ashtrays


Location and rules of use of the lighter and as